Top Tips in Cleaning a Refinished Bathtub – Our Guide

Top Tips in Cleaning a Refinished Bathtub – Our Guide.

There is nothing more alarming than seeing your porous or pitted bathtub becoming worn down or damaged over time. Not only is it unsightly in appearance, but your tub can also be very unhygienic. However, if you had your bathtub refinished quite recently, its surface will now look smooth and clean, and you’re more comfortable relaxing in the soapy water now more than ever.

How do you keep your bathtub clean and well-maintained in the long run? In this article, we will share with you some top tips in cleaning your refinished bathtub.

What cleaning methods to avoid

Before talking about the actual cleaning, let’s first take a look at some cleaning methods you must avoid for a refinished bathtub. Take note of the following:

  • Steam cleaning: While household steam can seem to remove the dirt and soap gunk, know that it can actually damage the finish of your bathtub if it gets through every crack or damaged part.
  • Power washing: The pressured water released from this device can be too strong for the painted surface of your bathtub, leaving a peeled or damaged coating.
  • Abrasives: They have harsh cleaners and rough sponges that aren’t recommended for refinished bathtubs. Avoid common abrasive cleaners, such as powdered cleanser, ammonia-containing products, and abrasive cream cleansers, among others.

What cleaners to use

Now that you know what to avoid as far as bathtub cleaners are concerned, let’s explore some commercial cleaners that you can use for your bathtub. Here are some of them:

  • Scrubbing Bubbles
  • Formula 409 (without bleach)
  • Lysol Tub and Tile Cleaner
  • Liquid Ajax

For tools and supplies you may need for your refinished bathtub cleaning, consider the following:

  • Non-abrasive cleaner
  • Sponge, microfiber cloth, or soft-bristle nylon brush
  • Bucket or container for rinse water
  • Soft towel or rag

How to clean your refinished bathtub

Now that you have the cleaners and tools handy for your bathtub cleaning, let’s get into the actual cleaning itself. Make sure to follow the steps below:

  • Start by rinsing the tub with warm water to get rid of hair and excess soap residue.
  • Apply the cleaner of your choice (based on the options mentioned above) to all the surfaces of your bathtub.
  • Let the cleaner sit for about five minutes for disinfection as it gets through soap residue and oils.
  • Scrub the entire surface of your bathtub by using non-abrasive cleaners, such as cellulose sponge, a microfiber cloth, or a soft, nylon-bristle brush.
  • Rinse the bathtub thoroughly until you don’t see any traces of the cleaner.
  • Wipe the tub dry with a soft towel or cloth and leave it sparkling clean and shiny.


At this point, you can now see that cleaning your refinished bathtub can be straightforward and relatively simple. Make sure to consider the valuable tips outlined above by knowing what to avoid and what to use. From there, follow the easy and simple steps mentioned above for thorough cleaning of your refinished bathtub. With a smooth and sparkling clean tub, you can now soak in the bathtub and have a relaxing experience that you deserve.

We perform refinishing services in Baltimore, MD, for bathtubs, showers, countertops, tiles, and even commercial spaces. If you’re looking to refinish your bathtub, get in touch with us today at Everglaze Coatings to see how we can help!